$ npm install @tapjs/snapshot
@tapjs/snapshot
A default tap plugin that adds snapshot functionality.
This plugin is installed with tap by default. If you had
previously removed it, you can tap plugin add @tapjs/snapshot
to
bring it back.
Snapshots are a way to make extremely comprehensive assertions about a value, and easily keep tests up to date. This is a powerful technique for testing many kinds of programs (especially those that generate output), but it comes with some caveats.
Consider a test program like this:
// tagger.mjs
export default (tag: string, contents: string) =>
`<${tag}>${contents}</${tag}>`
We might have a test like this:
// tagger.test.mjs
import t from 'tap'
import tagger from './tagger.mjs'
t.equal(tagger('tagName', 'content'), '<tagName>content</tagName>')
This is good for a couple of reasons:
However, managing strings like this can become extremely tedious, especially in cases where the output is long, or there are many cases to test. If we make an intentional change to the output, then we need to manually update a large number of large strings, possibly scattered throughout the test suite. The inevitable result is that we either make the tests less comprehensive, or even worse, treat some as "known failures".
We could also write our test file like this:
// tagger.test.mjs
import t from 'tap'
import tagger from './tagger.mjs'
t.matchSnapshot(tagger('tagName', 'content'), 'output')
But wait, where is the expected output?
To create the snapshot file, run this command:
$ tap tagger.test.mjs --snapshot
PASS test.js 1 OK 344ms
🌈 SUMMARY RESULTS 🌈
Suites: 1 passed, 1 of 1 completed
Asserts: 1 passed, of 1
Time: 422ms
By setting TAP_SNAPSHOT
in the environment or passing the --snapshot
command line flag, we tell tap to write the output to a special file, and
treat the assertion as automatically passing.
Snapshots will be generated by default if the npm script being run is named
snap
or snapshot
, so you can use this pattern to test and snapshot most
projects:
{
"name": "my-project",
"version": "1.2.3",
"devDependencies": {
"tap": "15"
},
"scripts": {
"test": "tap",
"snap": "tap"
}
}
Then, you can use npm test
to run your tests, or npm run snap
to
update snapshot files.
The generated file is designed to be human-readable, but you should not edit it directly.
$ cat tap-snapshots/tagger.test.mjs.test.cjs
/* IMPORTANT
* This snapshot file is auto-generated, but designed for humans.
* It should be checked into source control and tracked carefully.
* Re-generate by setting TAP_SNAPSHOT=1 and running tests.
* Make sure to inspect the output below. Do not ignore changes!
*/
'use strict'
exports[`tagger.test.mjs TAP > output 1`] = `
<tagName>content</tagName>
If the argument passed to t.matchSnapshot()
isn't a string,
then it will be converted to a string using
tcompare.format.
This is typically pretty easy for humans to understand, but of
course if you prefer to use JSON.stringify
or something else,
you can do so easily enough. The
t.formatSnapshot
can be used to customize this for an entire test.
Important: you should check the snapshot file into source control!
When there are changes to it, inspect the diff and make sure that nothing unexpected happened to change your output.
If you don't check this file into source control, then a significant part of your test is not checked in. This prevents people from collaborating on your project.
If you accept changes to it without care, then you can obscure unintended
changes. (Though, even if this happens, git bisect
can track down the
source of the change quite quickly, so it's not the end of the world if
there are occasional mistakes.)
t.cleanSnapshot
If your output includes data that is known to change from one run to the next, then these changes should be stripped before matching against a snapshot.
This includes process IDs, time stamps, and many other system details.
Consider this function:
// msgtime.mjs
export const msgTime = msg => {
return msg + ' time=' + Date.now()
}
Since the output will obviously be slightly different every time the function is tested, we need to strip out the time value.
The best way to do this is with a
t.cleanSnapshot
function. This function takes the formatted snapshot as a string,
and returns a string to be saved or compared against. The default
cleaner is an identity function that returns its input without
any changes.
A test that uses this method:
// msgtime.test.mjs
import t from 'tap'
// This must be assigned *before* running tests
// It is passed down to child tests when they are created
t.cleanSnapshot = s => s.replace(/ time=[0-9]+$/g, ' time={time}')
const output = msgTime('this is a test')
t.matchSnapshot(output, 'add timestamp to message')
When run with --snapshot
, it generates this snapshot
file:
/* IMPORTANT
* This snapshot file is auto-generated, but designed for humans.
* It should be checked into source control and tracked carefully.
* Re-generate by setting TAP_SNAPSHOT=1 and running tests.
* Make sure to inspect the output below. Do not ignore changes!
*/
'use strict'
exports[`msgtime.test.js TAP > add timestamp to message 1`] = `
this is a test time={time}
`
Sometimes just modifying the string is not enough, or a special data type should be stringified differently.
By default, tap uses
tcompare.format
to convert all non-string values into strings for saving and
comparing.
To override this and provide your own behavior, set a function to
t.formatSnapshot
.
Like t.cleanSnapshot
, child tests will copy their parent test's
value at their time of creation.
An example of using t.formatSnapshot
:
import t from 'tap'
import { stringify } from 'tap-yaml'
t.formatSnapshot = object => stringify(object)
// now all my snapshot files will be in yaml!
t.matchSnapshot({ foo: ['bar', 'baz'] })
This will produce the following snapshot file:
/* IMPORTANT
* This snapshot file is auto-generated, but designed for humans.
* It should be checked into source control and tracked carefully.
* Re-generate by setting TAP_SNAPSHOT=1 and running tests.
* Make sure to inspect the output below. Do not ignore changes!
*/
'use strict'
exports[`yaml.test.js TAP > must match snapshot 1`] = `
foo:
- bar
- baz
`
By default, the snapshot file that TAP uses is set based on the test filename and any arguments passed to it. This prevents having two test suites clobber one another's snapshots.
If you would like to specify a different filename for your snapshots, you
can do so by setting the
t.snapshotFile
field. If you set this field in a child test, then the parent
test (and all of its other child tests) will still use its old
snapshot file, but snapshots in the child test (and all its
children) will go to the new file.
But, be advised, this is advanced usage and exposes you to some hazards!
tap-snapshot
, and
should always end in .test.cjs
. This pattern ensures that tap can load
them properly, and that they will not be confused with normal test files.Example of using a separate snapshot file for subtests:
// file 'test/snappy.js'
import t from 'tap'
import { resolve } from 'node:path'
t.matchSnapshot(
'this writes to ./tap-snapshots/test/snappy.js.test.cjs',
)
t.test('foo', async t => {
// this writes to ./test/tap-snapshots/foo.test.cjs'
// either path or file URL or file URL string is fine, but
// it'll always store it as the actual path.
t.snapshotFile = new URL(
'../tap-snapshots/foo.test.cjs',
import.meta.url,
)
t.matchSnapshot('foo')
})
t.test('bar', async t => {
// this writes to ./test/tap-snapshots/bar.test.cjs'
t.snapshotFile = new URL(
'../tap-snapshots/bar.test.cjs',
import.meta.url,
)
t.matchSnapshot('bar')
})
t.test('baz', async t => {
// this one doesn't set it, so it uses the parent's snapshot object,
// which writes to ./tap-snapshots/test/snappy.js.test.cjs
t.matchSnapshot('baz')
})
This module works by using a Snapshot Provider, which is a class that implements read, save, and snap methods.
You can write your own one of those, and pass the custom class in
the snapshotProvider
option to a test.
With this, you can store snapshots anywhere you like, if for some reason putting them in a js file is not your desire.
© 2010 - cnpmjs.org x YWFE | Home | YWFE